Available Backsets for Passage/Deadbolt Backplate - 2 3/8" or 2 3/4" The backset for the passage/deadbolt entry set is the measurement from the edge of the door to the center of the 2 1/8" dia, hole on the face of the door. The vertical spacing is usually 5 1/2" o/c but can be customize to fit existing hole spacing.
Available functions: Passage w/ Deadbolt: These are complete sets with two doorknobs or levers, two backplates and all hardware for installing hardware on your entry door. Single keyed has a key lock on the outside and a thumbturn on the inside. Double keyed locks with a key on both sides. The door locks with a deadbolt lock at the top of the backplate and the doorknob or lever functions the same as a passage set.
Exterior Mortise Locks:
Heavy Duty Mortise Lock case is made of Stainless Steel
Available in 2 ½” or 2 ¾” backset
Deadlock has two saw proof steel pins hardened and inserted into a 1” throw
Case size for a 2 ½” backset is .875” x 3.5” x 4.0”
Case size for a 2 ¾” backset is .875” x 3.5” x 5.5”
Armour Front is 1.25” x 8.0”
Reversible Strike Plate is supplied
Lock measurements from Knob to Cylinder: 3.437” - Knob to Turn piece: 2.25”
